HMD EV130II Hybrid Electric Injection Molding Machine
Medium-tonnage precision platform · High-rigidity clamping system · Efficient stable mass production
EV130II builds on EV090II by reinforcing clamping rigidity and mold-space capacity while continuing to use the C210h precision injection unit. It is well suited for stable production of home-appliance structural parts, automotive small components, and medium-sized precision containers.
Injection Unit Parameters
Shares the C210h high-speed precision injection unit for both short cycle time and stable output.
| Parameter | Option A | Option B | Option C | Option D |
|---|---|---|---|---|
| Theoretical Shot Volume | 74 cm³ | 86 cm³ | 113 cm³ | 142 cm³ |
| Shot Weight (PS) | 67.3 g / 2.37 oz | 78 g / 2.75 oz | 102 g / 3.6 oz | 130 g / 4.59 oz |
| Injection Speed | 440 mm/s | 440 mm/s | 440 mm/s | 440 mm/s |
| Injection Rate | 214 g/s | 246 g/s | 321 g/s | 407 g/s |
| Screw Diameter | 26 mm | 28 mm | 32 mm | 36 mm |
| Injection Pressure | 300 MPa | 276 MPa | 211 MPa | 167 MPa |
| Continuous Holding Pressure | 225 MPa | 207 MPa | 158 MPa | 125 MPa |
| Screw L/D Ratio | 22.8 | 23.4 | 20.5 | 18.2 |
| Screw Stroke | 140 mm | 140 mm | 140 mm | 140 mm |
| Screw Speed | 400 r/min | 400 r/min | 400 r/min | 400 r/min |
Clamping Unit Parameters
| Item | Unit | Specification |
|---|---|---|
| Clamping Force | kN | 1300 |
| Moving Platen Stroke | mm | 380 |
| Platen Size | mm | 630 × 610 |
| Space Between Tie Bars (H × V) | mm | 430 × 410 |
| Max. Daylight | mm | 840 |
| Mold Thickness Range | mm | 150 - 460 |
| Ejector Stroke | mm | 125 |
| Ejector Force | kN | 42 |
Power and Heating System
| Item | Unit | Specification |
|---|---|---|
| Hydraulic System Pressure | MPa | 17.5 |
| Pump Motor Power | kW | 28.1 |
| Heating Power | kW | 6.92 |
| Temperature Control Zones | - | 4 |
| Oil Tank Capacity | L | 135 |
| Machine Dimensions (L × W × H) | m | 5.2 × 1.5 × 2.1 |
| Machine Weight | t | 4.0 |
Core Advantages
Reinforced clamping frame
Optimized tie-bar layout and platen rigidity help maintain dimensional stability in medium- and long-term production.
Intelligent temperature control
Independent PID control for each zone improves melt uniformity and part consistency.
Energy-saving servo hydraulic circuit
Demand-based oil supply reduces energy waste during non-production movements.