HMD130M8-IIP Servo Energy-Saving Injection Molding Machine
Small precision stable molding platform
HMD130M8-IIP is designed for applications such as electronics, medical consumables, and small thin-wall parts. The M8-II-P series continues the high-rigidity clamping platform, servo energy-saving hydraulics, and modular injection-unit configuration, emphasizing stable molding, energy-saving operation, and convenient maintenance.
Model Positioning
The M8-II-P series covers a complete platform range from small-tonnage precision molding to medium-large industrial products.
| Item | Unit | Specification |
|---|---|---|
| International Rating | — | 445/130 |
| Product Series | — | M8-II-P servo energy-saving injection molding machine |
| Model | — | HMD130M8-IIP |
| Clamping Force | kN | 1300 |
| Typical Applications | — | electronics, medical consumables, and small thin-wall parts |
| Page Status | — | Industrial premium page structure completed in the M8-SII/EVII style |
Injection Unit Parameters
Four shot-volume, pressure, and rate combinations are provided by different screw diameters and injection-unit specifications.
| Parameter | Unit | Option A | Option B | Option C | Option D |
|---|---|---|---|---|---|
| Theoretical Shot Volume | cm³ | 193 | 215 | 263 | 316 |
| Shot Weight (PS) | g | 176 | 196 | 239 | 287 |
| Shot Weight (PS) | oz | 6.2 | 6.9 | 8.4 | 10.1 |
| Injection Rate (PS) | g/s | 160 | 178 | 217 | 261 |
| Screw Diameter | mm | 36 | 38 | 42 | 46 |
| Injection Pressure | MPa | 230 | 207 | 169 | 141 |
| Screw L/D Ratio | — | 23.5:1 | 22:1 | 20:1 | 18:1 |
| Screw Stroke | mm | 190 | 190 | 190 | 190 |
| Screw Speed | r/min | 0~300 | 0~300 | 0~300 | 0~300 |
Clamping Unit Parameters
The high-rigidity clamping structure improves clamping stability and long-term repeatability.
| Item | Unit | Specification |
|---|---|---|
| Clamping Force | kN | 1300 |
| Opening Stroke | mm | 380 |
| Platen Size | mm | 630×610 |
| Space Between Tie Bars (H×V) | mm | 425×405 |
| Max. Daylight | mm | 840 |
| Mold Thickness (Min.-Max.) | mm | 150~460 |
| Ejector Stroke | mm | 120 |
| Ejector Force | kN | 50 |
Power and Control Parameters
Servo energy-saving hydraulics and a dedicated control system balance response speed, energy efficiency, and maintenance efficiency.
| Item | Unit | Specification |
|---|---|---|
| Hydraulic System Pressure | MPa | 17.5 |
| Pump Motor Power | kW | 26.5 |
| Heating Power | kW | 11.2 |
| Temperature Control Zones | — | 4 |
| Oil Tank Capacity | L | 145 |
| Overall Dimensions (L×W×H) | m | 4.4×1.3×1.9 |
| Machine Weight | Ton | 4.5 |
Due to continuous product improvement, technical parameters are subject to change without notice.
Machine Dimensions
Key overall machine dimensions for installation planning.
| Mark | Unit | Dimension |
|---|---|---|
| A | mm | 1580 |
| B | mm | 4406 |
| C | mm | 4450 |
| D | mm | 1930 |
| E | mm | 1340 |
For detailed engineering drawings, please refer to the product technical manual.
Core Advantages
High-Speed Injection Hydraulics
An optimized hydraulic control system significantly increases injection speed, making it easier to produce thin-wall parts and shortening molding cycle time.
Low-Friction Carriage Design
The injection carriage adopts a linear-guide design that minimizes friction on moving parts during operation, shortens injection acceleration time, and improves injection responsiveness.
Bi-Directional Injection Piston Rod
A dedicated bi-directional injection piston rod design provides balanced loading and extends the service life of the injection oil seal. It also greatly reduces oil return during high-speed injection, lowering return-flow resistance and making injection more stable.
Nano Far-Infrared Barrel Heating
Standard nano far-infrared heating bands on the screw and barrel are easy to install and remove, provide better insulation and energy savings, and further improve plasticizing quality.
High-Strength Platen & Reinforced Tie Bars
High-strength clamping platens are FEA-optimized for an improved overall mechanical structure, lower stress, and higher platen rigidity—particularly suited to thin-wall products. Tie bars use alloy steel with an enlarged design to extend service life under sustained high-speed operation.
Increased-Power Hydraulic Unit
An upgraded hydraulic control system with greater power increases the speed of every action and improves production efficiency. A standard high-precision proportional valve significantly improves mold-opening repeat positioning accuracy, while a dedicated high-speed plasticizing motor ensures long service life.
Dedicated High-Speed Controller & Imported Components
The electric unit uses an Italian INOVA dedicated high-speed controller paired with a 10-inch color display for high precision and high response. Contactors, limit switches, and other key electrical components are imported brands such as Schneider and Omron for reliable performance.