380SP6
HMD-SP6 Series Fully Hydraulic Servo Injection Molding Machine Specifications
Model note: This table uses SP6-160 (1600 kN) as the reference. Different screw configurations (A/B/C) directly affect injection pressure and volume. Please verify the selected configuration carefully.
1. Injection Unit
The injection unit determines part precision and shot-weight capacity.
| Items | Unit | SP6-160 (A) | SP6-160 (B) | SP6-160 (C) |
|---|---|---|---|---|
| Screw Diameter | mm | 40 | 45 | 50 |
| Screw L/D Ratio | L/D | 22.5 | 20 | 18 |
| Shot Volume | cm³ | 251 | 318 | 392 |
| Shot Weight - PS | g | 228 | 289 | 357 |
| Injection Pressure | MPa | 224 | 177 | 143 |
| Theoretical Injection Speed | mm/s | 115 | 115 | 115 |
2. Clamping Unit
The clamping unit is related to mold installation size and production stability.
| Items | Unit | Data |
|---|---|---|
| Clamping Force | kN | 1600 |
| Opening Stroke | mm | 430 |
| Space Between Tie Bars | mm | 470 × 470 |
| Max. Mold Height | mm | 500 |
| Min. Mold Height | mm | 180 |
| Ejector Stroke | mm | 140 |
| Ejector Force | kN | 50 |
3. Power and General Parameters
These parameters reflect energy consumption and floor-space requirements.
:::info Energy-saving note The SP6 series uses a high-response servo drive system. Compared with traditional fixed-pump machines, average energy savings can reach 30%–70%. :::
| Items | Unit | Data |
|---|---|---|
| Max. System Pressure | MPa | 17.5 |
| Pump Motor Power | kW | 15 |
| Heating Power | kW | 12.5 |
| Machine Weight | t | 5.2 |
| Machine Dimensions | m | 5.1 × 1.4 × 2.1 |
| Oil Tank Capacity | L | 260 |
4. Mold Mounting Template Drawing
Note: all dimensions in the drawing are in mm. Confirm locating-hole diameter and bolt specifications before installation.
5. Standard Configuration List
- Servo power system (Satori Drive)
- High-precision linear guide rails
- Multi-stage injection/holding control
- Automatic mold-change function (optional)